配重块模具制作 配重块模具厂家

配重块模具全部应用在石油管道的铺设上，一般都是在地下使用的，规格的话非常大，混凝土配重块的单个重量在400公斤以上，所以人工是无法搬运的。在配重块模具的生产上，依靠的对U型槽模具的制作技术以及方案，采用加厚钢板，因为壁厚比较大，混凝土方量多，如果使用薄点的钢板不足以支撑混凝土的压力。

配重块模具常用型号为219.1MM、273MM、323.9MM、457MM、610MM、813MM、1016MM等，配重块模具是采用钢板材质进行生产的，每套的重量在200公斤以上，可以直接放到平整的地面上，用机器或者人工灌入商混后，使用大型的震动棒震动就就可以了，等待混凝土凝固到一定程度后，方可脱模。

Counterweight block molds are all used in the laying of oil pipelines. They are generally used underground. If the specification is very large, the single weight of concrete counterweight block is more than 400 kg, so it can not be handled manually. In the production of counterweight block mold, we rely on the manufacturing technology and scheme of U-groove mold, and use thickened steel plate, because the wall thickness is relatively large and there is a large amount of concrete, if the use of thin steel plate is not enough to support the pressure of concrete.

The common models of counterweight block molds are 219.1mm, 273mm, 323.9mm, 457mm, 610mm, 813mm, 1016mm, etc. the counterweight block molds are made of steel plate. Each set weighs more than 200kg and can be directly placed on the flat ground. After pouring commercial concrete with machine or manual, use a large vibrator to vibrate. Wait until the concrete solidifies to a certain extent, Before demoulding.

很赞哦！(5)